Sending Alarm Leads

This article covers triggering Alarm Leads to send from your orders

Sydney Honda avatar
Written by Sydney Honda
Updated over a week ago

Quickly send your local alarm leads through ISN.

Simply click on the green and white shield icon on your inspection grid. Inspections - View Inspections. This turns the shield to blue and white indicating that the lead is ready to be sent (see example below).

Now go to Tools - Send Info to Local Alarm Leads. The system will take you to a screen where you will find a list of all of the alarm leads ready to be sent. Click on the tab at the bottom "Send inspection information to .......". Your leads will be sent and the system will now turn the shield icon on the inspection grid to red and white indicating they have been processed.

It is up to you whether you want to click the shields one at a time and send each one individually or, wait until the end of the day and send them all at once.

Please note, if you have a specific alarm company that you send leads to and want that company added to the Local Alarm Leads section within your ISN, please email us the alarm lead information to:

Did this answer your question?